DRILL RIGS
Please call (702) 883-9725 or email
sales@rocequipment.com for current
prices, sizes, and availability.
SANY SR150 Specifications
- Diesel motor of 6BTA5.9-C type (Komatsu Cummings) and CC-6BG1TRP type
(Isuzu Japan) applied, which possess the functions of load-sensing and
auto-adjusting output power.
- Hydraulic system adopts LUDV load-sensing system & pilot control loop to
achieve the optimal match under the various working condition load
- Imported key parts such as Hydraulic Pump, Hydraulic Motor, Reduction
gear, Hydraulic valve series, Rubber hose and Joints are introduced in
well-known brand to assure high reliability of system
- Based on flushtype system with core of work mechanism controller and
perfect CAN-Bus technique, which takes full charge of overall machine
monitoring.
- Debarkation adopts expansion track structure and low built,
counterweight backward design, which provide excellent stability of drilling
rig.
- Parallelogram amplitude variation mechanism is adopted to ensure correct
positioning of drill as well as mast perpendicularity. Thereby more
dependable drill working is implemented.
- SANY offers individualized equipments and spare parts according to
customer’s construction need.
|
| Max.output torque |
150kN.m(95883lb.ft) |
| Drilling speed of rotation |
7-40rpm |
| Max.oil cylinder push |
150kN(33720lb) |
| Max.oil cylinder pull |
160kN(35968lb) |
| Stoke of crowd system |
4250mm(13′11″) |
| Mast inclination(sideward) |
3 |
| Mast inclination(foreward) |
5 |
| Engine manufacturer |
Komatsu Cummings/lsuzu Japan |
| Main which pull(1st later) |
160kN(35968lb) |
| Main winch rope diameter |
28mm(1.1″) |
| Main winch hoisting speed |
70m/min(230ft/min) |
| Auxiliary winch pull (1st layer) |
60kN90(13488lb) |
| Auxiliary winch rope diameter |
14mm(0.55″) |
| Auxiliary winch hoisting speed |
60m/min(197ft/min) |
| Max. drilling depth |
46m(150.5ft) |
| Max. drilling diameter |
1500mm(4′11″) |
| Working width |
4000mm(13′11″) |
| Transport width |
3000mm(9′10″) |
| Transport height |
3305mm(10′10″) |
| Working height |
18440mm(60′6″) |
| Track shoe width |
600mm(2′) |
| Traction force |
220kN(49456lb) |
| Standard drilling bar |
ZG15M412(Φ377) |
| Operation available |
ZG15M410(Φ377) |
| Max. overall weight |
45t(44gross ton) |
|
SANY SR200C Specifications
- Machine with Max. Drilling depth of 60 M and Max. hole caliber of 1800mm
could satisfy most engineering construction requirements
- The air intercooling diesel motor (Isuzu Japan)gains such advantages as
low-noise, less vibration, high-efficiency, environment-friendly and
energy-saving, which meet the discharge standard of Stage Ⅱ& Tier2
- Based on flushtype system with core of work mechanism controller and
perfect CAN-BUS technique, it takes full charge of overall machine
monitoring
- Debarkation adopts expansion track structure and low built,
counterweight backward design, which provide excellent stability of drilling
rig
- Parallelogram amplitude variation mechanism is adopted to ensure correct
positioning of drill as well as mast perpendicularity. Thereby more
dependable drill working is implemented
- Imported key parts such as Oil Pump, Hydraulic Motor, Reduction gear,
Hydraulic valve series, Oil Pipe and Joints are introduced in well-known
brand to assure high reliability of system
- A variety of assistance devices such as diaphragm wall grab can be fit
out to extend drill's function
|
| Max.output torque |
200kN.m(147512lb.ft) |
| Drilling speed of rotation |
7-30rpm |
| Max.oil cylinder push |
150kN(33720lb) |
| Max.oil cylinder pull |
200kN(35968lb) |
| Stoke of crowd system |
4300mm(14′1″) |
| Mast inclination(sideward) |
3 |
| Mast inclination(foreward) |
5 |
| Engine manufacturer |
lsuzu Japan |
| Main which pull(1st later) |
200kN(147512lb) |
| Main winch rope diameter |
28mm(1.1″) |
| Main winch hoisting speed |
72m/min(236ft/min) |
| Auxiliary winch pull (1st layer) |
76kN(17085lb) |
| Auxiliary winch rope diameter |
20mm(0.8″) |
| Auxiliary winch hoisting speed |
79m/min(259ft/min) |
| Max. drilling depth |
60m(197ft) |
| Max. drilling diameter |
1800mm(5′11″) |
| Working width |
4000mm(13′1″) |
| Transport width |
3000mm(9′10″) |
| Transport height |
3400mm(11′2″) |
| Working height |
19550mm(64′2″) |
| Track shoe width |
700mm(2′4″) |
| Traction force |
360kN(80928lb) |
| Standard drilling bar |
ZG22M513Ⅱ(Φ400) |
| Operation available |
ZG22M513(Φ400) |
| Max. overall weight |
60t(59gross ton) |
|
SANY SR220C Specifications
- Machine with Max. Drilling depth of 67 M and Max. hole caliber of 2500mm
are adequate for large and medium-sized stake project construction
- Super output torque of 250kN.m ensures construction accomplishment under
different geological conditions
- CATC9 electric injection turbo-charged air intercooling diesel
motor(Caterpillar U.S) gains such advantages as low-noise, less vibration,
high-efficiency, environment-friendly and energy-saving, which meet the
discharge standard of EPACⅡ
- Diesel engine bears auto accelerate/speed droop functions reducing the
fuel consumption down by 5-10%
- Hydraulic system adopts CAT master control loop & pilot control loop to
achieve the optimal match under the various working condition load
- Imported key parts such as Hydraulic Pump, Hydraulic Motor, Hydraulic
valve, and Piping Joints are introduced in well-known brand to assure high
reliability of system
- Advanced Rexroth Electronic Leveling System with mutual switch from
manual to auto is introduced to keep vertical status of mast under the
operation circumstances as well as efficiently ensure perpendicularity
requirement of hole
|
| Max.output torque |
250kN.m(178672lb.ft) |
| Drilling speed of rotation |
7-26/128rpm |
| Max.oil cylinder push |
180kN(40466lb) |
| Max.oil cylinder pull |
240kN(53954lb) |
| Stoke of crowd system |
5160mm(16′11″) |
| Mast inclination(sideward) |
6 |
| Mast inclination(foreward) |
5 |
| Engine manufacturer |
Caterpillar |
| Main which pull(1st later) |
240kN(53954lb) |
| Main winch rope diameter |
28mm(1.1″) |
| Main winch hoisting speed |
70m/min(230ft/min) |
| Auxiliary winch pull (1st layer) |
110kN(24729lb) |
| Auxiliary winch rope diameter |
20mm(0.8″) |
| Auxiliary winch hoisting speed |
70m/min(230ft/min) |
| Max. drilling depth |
67m(220ft) |
| Max. drilling diameter |
2300/2500mm(7′7″/8′2″) |
| Working width |
4300mm(14′1″) |
| Transport width |
3000mm(9′10″) |
| Transport height |
3400mm(11′2″) |
| Working height |
21045mm(69′) |
| Track shoe width |
800mm(2′7″) |
| Traction force |
510kN(114653lb) |
| Standard drilling bar |
ZG22M513Ⅱ(Φ400) |
| Operation available |
ZG22M514(Φ400) |
| Max. overall weight |
65t(64gross ton) |
|
SANY SR250 Specifications
- Machine with Max. Drilling depth of 70 M and Max. hole caliber of 2500mm
are adequate for large and medium-sized stake project construction
- Super output torque of 285kN•m ensures construction accomplishment under
different geological conditions
- Diesel engine bears auto accelerate/speed droop functions reducing the
fuel consumption down by 5-10%
- Diesel motor gains such advantages as low-noise, less vibration,
high-efficiency, environment-friendly and energy-saving, which meet the
discharge standard of EPACⅢ
- Hydraulic system makes flux distribution to executive unit in accordance
with need so as to achieve the optimal match under the various working
conditions load
- Imported key parts such as Hydraulic Pump, Hydraulic Motor, Hydraulic
value, and Piping Joints are introduced to keep vertical status of mast
under the operation circumstances as well as efficiently ensure
perpendicularity requirement of hole
|
| Max.output torque |
285kN.m(184390lb.ft) |
| Drilling speed of rotation |
6-30rpm |
| Max.oil cylinder push |
180kN(40466lb) |
| Max.oil cylinder pull |
256kN(57549lb) |
| Stoke of crowd system |
5300mm(17′5″) |
| Mast inclination(sideward) |
6 |
| Mast inclination(foreward) |
5 |
| Engine manufacturer |
Caterpillar |
| Main which pull(1st later) |
256kN(57549lb) |
| Main winch rope diameter |
32mm(1.3″) |
| Main winch hoisting speed |
63m/min(207ft/min) |
| Auxiliary winch pull (1st layer) |
110kN(24729lb) |
| Auxiliary winch rope diameter |
20mm(0.8″) |
| Auxiliary winch hoisting speed |
70m/min(230ft/min) |
| Max. drilling depth |
70m(230ft) |
| Max. drilling diameter |
2300/2500mm(7′7″/8′2″) |
| Working width |
4300mm(14′1″) |
| Transport width |
3000mm(9′10″) |
| Transport height |
3520mm(11′7″) |
| Working height |
21525mm(70′7″) |
| Track shoe width |
800mm(2′7″) |
| Traction force |
510kN(114653lb) |
| Standard drilling bar |
ZG22M514(Φ400) |
| Operation available |
ZG22M515Ⅱ(Φ400) |
| Max. overall weight |
70t(69gross ton) |
|
SoilMec R622HD Specifications
SoilMec R930 Specifications
SoilMec R930B Specifications
SoilMec R1240 Specifications
